Cooling in flat - Professional Quartz Stone Countertops and Slabs Manufacturer
The pressed sheets are sent to the curing oven, where the programmable temperature by difference control technology is adopted to heat the upper and lower splints at the same time, so that the slabs can be uniformly heated and cured.The cured slabs are sent to the polished line through a 50 meter horizontal cooling transfer line.During the process of transfer, the slabs are always kept straight and even. At the specific unloading position, the temperature of the slabs will be dropped from 90℃ to lower than 40℃, and then horizontal placed on the plated racks to cool down for more than 24 hours before polishing.
Quality Control for Quartz Surface Countertop Fabrication
Cutting And Edge Forming.
Help customer to Check drawing to make sure all the thing reasonable and correct
Please
understand that, for volume countertop fabrication, for single design
countertop, for standard countertop, our charge and quotation may be
different due to the material waste and time cost.
Make sure the cutting drawing is correct, we need to confirm by related chief. No mistake is allowed.
Before cutting slab, must recheck and make sure the slab is perfect, and meet with the cutting drawing.
The
first finished part need always be strictly checked, the angle, the
size, is there’s damages. The rest part need to do polling test to see
if it meets with requirement.
Fabrication is a very detailed job, all
the QC workers need to walk around to do polling test and make sure
things are carry on correct.
Comments
Post a Comment